Concept Window Latch Handle
Concept made solid gear, but the small plastics are always the first to go — and the window latch handle is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Concept made solid gear, but the small plastics are always the first to go — and the window latch handle is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Why these break
Handle snaps at the pivot from UV embrittlement. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — twenty years on, there's no margin left in it.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in ASA. ASA is the UV-stable cousin of ABS — it holds its colour and strength through years of Australian sun where the original plastic went chalky and brittle.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Concept |
|---|---|
| Vehicle / equipment type | Caravan / pop-top |
| Common failure mode | Handle snaps at the pivot from UV embrittlement |
| Typical use case | Direct replacement for the original window latch handle on the Concept. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $15 – $35 |
| Expected lifespan | 4–6 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
