Samsung Dryer Door Hinge Bush
Samsung made solid gear, but the small plastics are always the first to go — and the dryer door hinge bush is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Samsung made solid gear, but the small plastics are always the first to go — and the dryer door hinge bush is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Hinge bushes wear oval and the door sags. The factory part is made from styrene-based plastic that loses its plasticisers over the years. It gets glassy, then one warm day it lets go under a load it used to handle easily.
How we reproduce them
This is a quick job on our end — we take dimensions from your old part, adjust for print tolerances, and run a small batch so you have spares for next time.
We print these in Nylon. Nylon is slippery and fatigue-resistant, which makes it the right choice for parts that pivot, slide or flex thousands of times.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Samsung |
|---|---|
| Vehicle / equipment type | Household appliance |
| Common failure mode | Hinge bushes wear oval and the door sags |
| Typical use case | Direct replacement for the original dryer door hinge bush on the Samsung. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $8 – $20 |
| Expected lifespan | 5+ years in service |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
