CFMoto Fairing Tab Repair
If the fairing tab repair on your CFMoto has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $35 – $80
- Estimated print time: 2–4 hours
- Final pricing is confirmed by quote.
If the fairing tab repair on your CFMoto has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Why these break
Fairing mounting tabs snap in drops and tip-overs. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
This is a genuine reverse-engineering job: we scan or measure your part, rebuild it in CAD, and iterate test fits until it's right. Worth it for parts you simply cannot buy anymore.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | CFMoto |
|---|---|
| Vehicle / equipment type | Motorcycle |
| Common failure mode | Fairing mounting tabs snap in drops and tip-overs |
| Typical use case | Direct replacement for the original fairing tab repair on the CFMoto. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Hard |
| Estimated print time | 2–4 hours |
| Estimated cost range | $35 – $80 |
| Expected lifespan | 5+ years indoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
