Stacer Seat Swivel Bush
If the seat swivel bush on your Stacer has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. We've made this style of part before and can usually print yours without drama.
If the seat swivel bush on your Stacer has cracked or crumbled, it's a part we can usually sort without chasing discontinued spares. We've made this style of part before and can usually print yours without drama.
Why these break
Swivel bushes wear and seats rock. Heat cycling is the killer here: years of expanding and contracting work-hardens the plastic until a routine bump becomes the final straw.
How we reproduce them
The process is simple: drop the part in or send clear photos with a ruler in frame, we confirm fit details, and print replacements — often with a little extra material where the original always cracked.
We print these in Nylon. Nylon is slippery and fatigue-resistant, which makes it the right choice for parts that pivot, slide or flex thousands of times.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Stacer |
|---|---|
| Vehicle / equipment type | Boat / outboard |
| Common failure mode | Swivel bushes wear and seats rock |
| Typical use case | Direct replacement for the original seat swivel bush on the Stacer. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Nylon |
| Alternative materials | PA-CF |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $25 |
| Expected lifespan | 5+ years, even on moving parts |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
