Trakmaster Window Stay Arm
Trakmaster made solid gear, but the small plastics are always the first to go — and the window stay arm is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $14 – $32
- Estimated print time: 1–2 hours
- Final pricing is confirmed by quote.
Trakmaster made solid gear, but the small plastics are always the first to go — and the window stay arm is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Stay arms snap at the pivot hole. Heat cycling is the killer here: years of expanding and contracting work-hardens the plastic until a routine bump becomes the final straw.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Trakmaster |
|---|---|
| Vehicle / equipment type | Caravan / pop-top |
| Common failure mode | Stay arms snap at the pivot hole |
| Typical use case | Direct replacement for the original window stay arm on the Trakmaster. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $14 – $32 |
| Expected lifespan | 5+ years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
