Omega Washing Machine Soap Drawer Lug
Omega made solid gear, but the small plastics are always the first to go — and the washing machine soap drawer lug is a regular on our bench. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Omega made solid gear, but the small plastics are always the first to go — and the washing machine soap drawer lug is a regular on our bench. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Why these break
Drawer guide lugs snap so the drawer jams or falls out. Heat cycling is the killer here: years of expanding and contracting work-hardens the plastic until a routine bump becomes the final straw.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in PETG. PETG has a little give in it, so it snaps into place like the original and shrugs off the knocks that shattered the old part.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Omega |
|---|---|
| Vehicle / equipment type | Household appliance |
| Common failure mode | Drawer guide lugs snap so the drawer jams or falls out |
| Typical use case | Direct replacement for the original washing machine soap drawer lug on the Omega. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–3 hours |
| Estimated cost range | $20 – $45 |
| Expected lifespan | 5+ years indoors |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
