Ariston Dryer Timer Knob
We keep getting asked about this one — the dryer timer knob is one of those Ariston parts that fails long before the rest of the unit is done. We've made this style of part before and can usually print yours without drama.
We keep getting asked about this one — the dryer timer knob is one of those Ariston parts that fails long before the rest of the unit is done. We've made this style of part before and can usually print yours without drama.
Why these break
Timer knob cracks and slips on the shaft. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Ariston |
|---|---|
| Vehicle / equipment type | Household appliance |
| Common failure mode | Timer knob cracks and slips on the shaft |
| Typical use case | Direct replacement for the original dryer timer knob on the Ariston. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $10 – $22 |
| Expected lifespan | 5+ years in normal use |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
