Hilti Depth Adjustment Knob
Hilti made solid gear, but the small plastics are always the first to go — and the depth adjustment knob is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Hilti made solid gear, but the small plastics are always the first to go — and the depth adjustment knob is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Adjustment knobs crack at the insert. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Hilti |
|---|---|
| Vehicle / equipment type | Power tool |
| Common failure mode | Adjustment knobs crack at the insert |
| Typical use case | Direct replacement for the original depth adjustment knob on the Hilti. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $28 |
| Expected lifespan | 5+ years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
