Kincrome Charger Wall Bracket
A broken charger wall bracket shouldn't sideline otherwise good Kincrome equipment, and with a decent sample to work from it usually doesn't have to. We've made this style of part before and can usually print yours without drama.
A broken charger wall bracket shouldn't sideline otherwise good Kincrome equipment, and with a decent sample to work from it usually doesn't have to. We've made this style of part before and can usually print yours without drama.
Why these break
No factory wall mount exists. Vibration fatigue does the damage: thousands of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Kincrome |
|---|---|
| Vehicle / equipment type | Power tool |
| Common failure mode | No factory wall mount exists |
| Typical use case | Direct replacement for the original charger wall bracket on the Kincrome. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 3–5 hours |
| Estimated cost range | $25 – $55 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
