Nissan Patrol GU Headlight Tab Repair
A headlight tab repair for the Nissan Patrol GU is a typical small-but-annoying part: cheap when it was on a shelf, unobtainable or overpriced now. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $40 – $90
- Estimated print time: 2–4 hours
- Final pricing is confirmed by quote.
A headlight tab repair for the Nissan Patrol GU is a typical small-but-annoying part: cheap when it was on a shelf, unobtainable or overpriced now. With your sample on the bench this is a realistic reproduction job.
Why these break
Headlight mounting tabs snap in minor bumps. The factory part is made from styrene-based plastic that loses its plasticisers over the years. It gets glassy, then one warm day it lets go under a load it used to handle easily.
How we reproduce them
This is a genuine reverse-engineering job: we scan or measure your part, rebuild it in CAD, and iterate test fits until it's right. Worth it for parts you simply cannot buy anymore.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles cabin temperatures without complaint.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Nissan |
|---|---|
| Model | Patrol GU |
| Year range | 1997–2016 |
| Vehicle / equipment type | Passenger vehicle / ute |
| Common failure mode | Headlight mounting tabs snap in minor bumps |
| Typical use case | Direct replacement for the original headlight tab repair on the Nissan Patrol GU. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Hard |
| Estimated print time | 2–4 hours |
| Estimated cost range | $40 – $90 |
| Expected lifespan | 5+ years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
