Ford Territory Cup Holder Insert
Centre console cup holder insert for the Territory. Depending on the damage we can print the whole insert or just the broken flap arm.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $20 – $45
- Estimated print time: 2–4 hours
- Final pricing is confirmed by quote.
Centre console cup holder insert for the Territory. Depending on the damage we can print the whole insert or just the broken flap arm.
Common failure: Spring flap arms snap off.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Ford Australia |
|---|---|
| Model | Territory SX / SY |
| Year range | 2004–2011 |
| Common failure mode | Spring flap arms snap off |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–4 hours |
| Estimated cost range | $20 – $45 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
