Side Mirror Internal Bracket
Internal mirror brackets vary hugely between models — we reverse engineer from your broken part. Often far cheaper than a whole mirror assembly.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $45 – $110
- Estimated print time: 3–6 hours
- Final pricing is confirmed by quote.
Internal mirror brackets vary hugely between models — we reverse engineer from your broken part. Often far cheaper than a whole mirror assembly.
Common failure: Internal mounting bosses crack so the glass or motor flops.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Most makes and models |
|---|---|
| Common failure mode | Internal mounting bosses crack so the glass or motor flops |
| Typical use case | Replacement part for most makes and models. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | PA-CF |
| Print technology | FDM |
| Difficulty | Hard |
| Estimated print time | 3–6 hours |
| Estimated cost range | $45 – $110 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | Depends |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
