HVAC Vent Blade & Pivot Repair
Dash vent blades and pivots are tiny, fiddly, and different in every car — but often repairable. We assess these case by case from photos or the part itself.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $30 – $80
- Estimated print time: 2–5 hours
- Final pricing is confirmed by quote.
Dash vent blades and pivots are tiny, fiddly, and different in every car — but often repairable. We assess these case by case from photos or the part itself.
Common failure: Vent blades snap off their pivots and rattle or fall inside the dash.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Most makes and models |
|---|---|
| Common failure mode | Vent blades snap off their pivots and rattle or fall inside the dash |
| Typical use case | Replacement part for most makes and models. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Experimental |
| Estimated print time | 2–5 hours |
| Estimated cost range | $30 – $80 |
| Expected lifespan | 2–4 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
