Thetford Fridge Shelf End Cap
End caps for Thetford three-way fridge shelves. Food-adjacent but not food-contact; printed in easy-clean PETG.
End caps for Thetford three-way fridge shelves. Food-adjacent but not food-contact; printed in easy-clean PETG.
Common failure: Shelf rail end caps crack and shelves slide out.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Thetford |
|---|---|
| Common failure mode | Shelf rail end caps crack and shelves slide out |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $8 – $18 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
