Dryer Door Hinge Bush
Wear bushes for dryer door hinges, printed in heat-tolerant nylon. Sold in pairs.
Wear bushes for dryer door hinges, printed in heat-tolerant nylon. Sold in pairs.
Common failure: Hinge bushes wear oval and the door sags.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Most dryer brands |
|---|---|
| Common failure mode | Hinge bushes wear oval and the door sags |
| Typical use case | Replacement part for most dryer brands. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $8 – $20 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
