Makita Charger Wall Bracket
Custom wall brackets for Makita chargers — a designed-from-scratch improvement rather than a repair. We can adapt the design to your charger model.
Custom wall brackets for Makita chargers — a designed-from-scratch improvement rather than a repair. We can adapt the design to your charger model.
Common failure: No factory wall-mount exists.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Makita |
|---|---|
| Model | DC18RC and similar chargers |
| Common failure mode | No factory wall-mount exists |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 3–5 hours |
| Estimated cost range | $25 – $55 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
