Fly Screen Corner Joiner
Corner joiners for standard fly screen frames, in common sizes. Sold by the set of four.
Corner joiners for standard fly screen frames, in common sizes. Sold by the set of four.
Common failure: Corners crack when screens are removed for cleaning.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Standard 11mm screen frame |
|---|---|
| Common failure mode | Corners crack when screens are removed for cleaning |
| Typical use case | Replacement part for standard 11mm screen frame. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 10–20 minutes |
| Estimated cost range | $2 – $6 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
