Kitchen Drawer Runner Clip
Mounting and locking clips for kitchen drawer runners. Bring the broken clip — brands vary and the details matter.
Mounting and locking clips for kitchen drawer runners. Bring the broken clip — brands vary and the details matter.
Common failure: Runner mounting clips snap so drawers droop.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Common drawer runner systems |
|---|---|
| Common failure mode | Runner mounting clips snap so drawers droop |
| Typical use case | Replacement part for common drawer runner systems. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $6 – $16 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
