Conveyor Side Guide Block
Wear blocks and side guides for light conveyors — printed overnight so a worn block doesn't stop a line while genuine parts ship.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $45 – $120
- Estimated print time: 3–6 hours
- Final pricing is confirmed by quote.
Wear blocks and side guides for light conveyors — printed overnight so a worn block doesn't stop a line while genuine parts ship.
Common failure: UHMW guide blocks wear and belts track off.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Light packaging conveyors |
|---|---|
| Common failure mode | UHMW guide blocks wear and belts track off |
| Typical use case | Replacement part for light packaging conveyors. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Hard |
| Estimated print time | 3–6 hours |
| Estimated cost range | $45 – $120 |
| Expected lifespan | 6–18 months in service |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
