Control Panel Enclosure Hinge
Lift-off and butt hinges for plastic electrical enclosures where the maker is long gone. Modelled from your sample.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $25 – $65
- Estimated print time: 2–4 hours
- Final pricing is confirmed by quote.
Lift-off and butt hinges for plastic electrical enclosures where the maker is long gone. Modelled from your sample.
Common failure: Enclosure door hinges snap and doors hang by the latch.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Electrical enclosures |
|---|---|
| Common failure mode | Enclosure door hinges snap and doors hang by the latch |
| Typical use case | Replacement part for electrical enclosures. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–4 hours |
| Estimated cost range | $25 – $65 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | Depends |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
