Nissan Navara D40 Seat Adjuster Handle
Seat recline and adjuster handles for D40 Navaras with a properly fitted spline — no more vice grips on the bare shaft.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $18 – $40
- Estimated print time: 1–2 hours
- Final pricing is confirmed by quote.
Seat recline and adjuster handles for D40 Navaras with a properly fitted spline — no more vice grips on the bare shaft.
Common failure: Recline handle splits at the splined bore.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Nissan |
|---|---|
| Model | Navara D40 |
| Year range | 2005–2015 |
| Common failure mode | Recline handle splits at the splined bore |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $18 – $40 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
