Bull Bar Aerial Mount Bracket
UHF and lighting brackets for bull bars, printed in carbon-fibre nylon. Vibration is brutal on these — we design in generous fillets.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $20 – $50
- Estimated print time: 2–3 hours
- Final pricing is confirmed by quote.
UHF and lighting brackets for bull bars, printed in carbon-fibre nylon. Vibration is brutal on these — we design in generous fillets.
Common failure: UHF aerial mount cracks from corrugation vibration.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | 4WD bull bars |
|---|---|
| Common failure mode | UHF aerial mount cracks from corrugation vibration |
| Typical use case | Replacement part for 4WD bull bars. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $20 – $50 |
| Expected lifespan | 2–4 years off-road |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
