Coromal Pop-Top Clamp Knob
Pop-top roof clamp knobs for Coromal vans, printed around a brass thread insert for real clamping force.
Pop-top roof clamp knobs for Coromal vans, printed around a brass thread insert for real clamping force.
Common failure: Roof clamp knobs split at the thread insert.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Coromal |
|---|---|
| Common failure mode | Roof clamp knobs split at the thread insert |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | ASA |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $14 – $30 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
