Jockey Wheel Handle Knob
Free-spinning handle knobs for jockey wheels, printed in tough nylon with a proper bearing surface.
Free-spinning handle knobs for jockey wheels, printed in tough nylon with a proper bearing surface.
Common failure: Winding handle knob cracks off its spindle.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Standard jockey wheels |
|---|---|
| Common failure mode | Winding handle knob cracks off its spindle |
| Typical use case | Replacement part for standard jockey wheels. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Nylon |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $25 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
