Bed Slide End Stop
End stops and glide blocks for slide-out camper beds, printed in carbon-fibre nylon to take repeated impact.
End stops and glide blocks for slide-out camper beds, printed in carbon-fibre nylon to take repeated impact.
Common failure: End stops shear and the slide-out bed over-travels.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Camper slide-out beds |
|---|---|
| Common failure mode | End stops shear and the slide-out bed over-travels |
| Typical use case | Replacement part for camper slide-out beds. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PA-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $15 – $35 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
