Fisher & Paykel DishDrawer Tine Clip
Tine clips and rack fittings for F&P DishDrawers — tiny parts with big prices at the spares counter.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $6 – $15
- Estimated print time: 30–60 minutes
- Minimum order: 4
- Final pricing is confirmed by quote.
Tine clips and rack fittings for F&P DishDrawers — tiny parts with big prices at the spares counter.
Common failure: Folding tine clips snap and racks collapse.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Manufacturer | Fisher & Paykel |
|---|---|
| Model | DishDrawer series |
| Common failure mode | Folding tine clips snap and racks collapse |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $6 – $15 |
| Expected lifespan | 2–4 years in dishwasher conditions |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
