Socket Rail Clips
Socket rail clips in all three drive sizes, any colour, sold by the twenty.
Socket rail clips in all three drive sizes, any colour, sold by the twenty.
Common failure: Rail clips crack and sockets end up loose in the drawer.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | 1/4, 3/8 and 1/2 inch drives |
|---|---|
| Common failure mode | Rail clips crack and sockets end up loose in the drawer |
| Typical use case | Replacement part for 1/4, 3/8 and 1/2 inch drives. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 5–10 minutes each |
| Estimated cost range | $1 – $3 each |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
