Trampoline Pole Cap
Enclosure pole caps and net hooks for trampolines, in the common pole diameters.
Enclosure pole caps and net hooks for trampolines, in the common pole diameters.
Common failure: Enclosure pole caps split from UV.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Common trampoline brands |
|---|---|
| Common failure mode | Enclosure pole caps split from UV |
| Typical use case | Replacement part for common trampoline brands. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | TPU |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $5 – $12 |
| Expected lifespan | 2–4 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
