Pool Cleaner Flapper & Wing Set
Flexible flappers and wings for suction pool cleaners. Chlorinated water is hard on flexible prints, so we're trialling materials — ask for the current verdict.
Flexible flappers and wings for suction pool cleaners. Chlorinated water is hard on flexible prints, so we're trialling materials — ask for the current verdict.
Common failure: Flappers and skirt wings wear out each season.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Suction pool cleaners |
|---|---|
| Common failure mode | Flappers and skirt wings wear out each season |
| Typical use case | Replacement part for suction pool cleaners. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | TPU |
| Print technology | FDM |
| Difficulty | Experimental |
| Estimated print time | 2–4 hours |
| Estimated cost range | $20 – $45 |
| Expected lifespan | 1–2 seasons |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
