Sliding Screen Door Roller Housing
Roller housings and adjuster blocks for sliding security and flyscreen doors. Bring the old one — profiles vary by door maker.
Roller housings and adjuster blocks for sliding security and flyscreen doors. Bring the old one — profiles vary by door maker.
Common failure: Roller housings crack and the door drags.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Aluminium screen doors |
|---|---|
| Common failure mode | Roller housings crack and the door drags |
| Typical use case | Replacement part for aluminium screen doors. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Nylon |
| Alternative materials | PETG-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $14 – $32 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
