Security Door Mesh Clip
Mesh retaining clips and spline corners for barrier doors, sold in sets.
Mesh retaining clips and spline corners for barrier doors, sold in sets.
Common failure: Mesh retaining clips crack and the mesh rattles.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Barrier and security doors |
|---|---|
| Common failure mode | Mesh retaining clips crack and the mesh rattles |
| Typical use case | Replacement part for barrier and security doors. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 10–20 minutes each |
| Estimated cost range | $2 – $5 each |
| Expected lifespan | 3–5 years |
| Outdoor suitable | Depends |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
