Highchair Tray Latch
Tray latches for highchairs. Child products get our most conservative assessment — we test-fit and load-test before handing over.
Tray latches for highchairs. Child products get our most conservative assessment — we test-fit and load-test before handing over.
Common failure: Tray release latch wears and the tray won't lock.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Common highchair brands |
|---|---|
| Common failure mode | Tray release latch wears and the tray won't lock |
| Typical use case | Replacement part for common highchair brands. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $26 |
| Expected lifespan | 2–4 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
