Holden Commodore VN–VP Grab Handle Bracket
This is the kind of grab handle bracket that dealers only sell as part of a whole assembly — if they can supply it at all for a Holden Commodore VN–VP these days. We've made this style of part before and can usually print yours without drama.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $18 – $40
- Estimated print time: 1–3 hours
- Minimum order: 2
- Final pricing is confirmed by quote.
This is the kind of grab handle bracket that dealers only sell as part of a whole assembly — if they can supply it at all for a Holden Commodore VN–VP these days. We've made this style of part before and can usually print yours without drama.
Why these break
Roof grab handle brackets snap at the screw boss. Vibration fatigue does the damage: thousands of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Holden |
|---|---|
| Model | Commodore VN–VP |
| Year range | 1988–1993 |
| Vehicle / equipment type | Passenger vehicle / ute |
| Common failure mode | Roof grab handle brackets snap at the screw boss |
| Typical use case | Direct replacement for the original grab handle bracket on the Holden Commodore VN–VP. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | PA-CF |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–3 hours |
| Estimated cost range | $18 – $40 |
| Expected lifespan | 4–6 years under clamping load |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
