Bike Bottle Cage
Bottle cages, light mounts and mudguard clips for bikes. Custom colours to match your frame.
Bottle cages, light mounts and mudguard clips for bikes. Custom colours to match your frame.
Common failure: Cages snap at the mounting tabs.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Standard bottle bosses |
|---|---|
| Common failure mode | Cages snap at the mounting tabs |
| Typical use case | Replacement part for standard bottle bosses. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | PA-CF |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $22 |
| Expected lifespan | 2–4 years |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
