Mudflap Spacer Block Set
Mudflap spacers and backing blocks in any thickness — printed to suit your mounting holes.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $10 – $25
- Estimated print time: 1–2 hours
- Minimum order: 4
- Final pricing is confirmed by quote.
Mudflap spacers and backing blocks in any thickness — printed to suit your mounting holes.
Common failure: Spacer blocks compress and crack on work utes and trucks.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Utes, trucks, trailers |
|---|---|
| Common failure mode | Spacer blocks compress and crack on work utes and trucks |
| Typical use case | Replacement part for utes, trucks, trailers. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | TPU |
| Alternative materials | ASA |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $25 |
| Expected lifespan | 2–4 years |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
