Hyundai Kona Glovebox Hinge Repair
This is the kind of glovebox hinge repair that dealers only sell as part of a whole assembly — if they can supply it at all for a Hyundai Kona these days. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $25 – $55
- Estimated print time: 2–3 hours
- Final pricing is confirmed by quote.
This is the kind of glovebox hinge repair that dealers only sell as part of a whole assembly — if they can supply it at all for a Hyundai Kona these days. Variants differ between years and models, so we'll need your part (broken is fine) to match the exact one.
Why these break
Hinge lugs shear so the glovebox lid drops or falls out. Vibration fatigue does the damage: thousands of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
Bring in the broken part and we'll reverse engineer it — usually with a design tweak that addresses why it failed in the first place, not just a copy of the weak original.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Hyundai |
|---|---|
| Model | Kona |
| Year range | 2017–2023 |
| Vehicle / equipment type | Passenger vehicle / ute |
| Common failure mode | Hinge lugs shear so the glovebox lid drops or falls out |
| Typical use case | Direct replacement for the original glovebox hinge repair on the Hyundai Kona. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $25 – $55 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
