Specialized Grip End Plug
We keep getting asked about this one — the grip end plug is one of those Specialized parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $4 – $10
- Estimated print time: 15–30 minutes
- Minimum order: 2
- Final pricing is confirmed by quote.
We keep getting asked about this one — the grip end plug is one of those Specialized parts that fails long before the rest of the unit is done. With your sample on the bench this is a realistic reproduction job.
Why these break
Bar end plugs fall out and grips fray. The factory part is made from plastic that loses its plasticisers over the years. It gets glassy, then one day it lets go under a load it used to handle easily.
How we reproduce them
The process is simple: drop the part in or send clear photos with a ruler in frame, we confirm fit details, and print replacements — often with a little extra material where the original always cracked.
We print these in TPU. TPU is flexible and grippy, so it absorbs the impacts and vibration that crack rigid plastics, and it is kind to the surfaces it touches.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Specialized |
|---|---|
| Vehicle / equipment type | Bicycle |
| Common failure mode | Bar end plugs fall out and grips fray |
| Typical use case | Replacement part for bicycle. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | TPU |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 15–30 minutes |
| Estimated cost range | $4 – $10 |
| Expected lifespan | 2–4 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
