Coleman Tent Pole End Cap
Coleman made solid gear, but the small plastics are always the first to go — and the tent pole end cap is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Coleman made solid gear, but the small plastics are always the first to go — and the tent pole end cap is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Why these break
Pole end caps split and poles chew through canvas. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in TPU. TPU is flexible and grippy, so it absorbs the impacts and vibration that crack rigid plastics, and it is kind to the surfaces it touches.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Coleman |
|---|---|
| Vehicle / equipment type | Camping gear |
| Common failure mode | Pole end caps split and poles chew through canvas |
| Typical use case | Replacement part for camping gear. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | TPU |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 15–30 minutes |
| Estimated cost range | $3 – $8 |
| Expected lifespan | 2–4 years outdoors |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
