Darche Stove Control Knob
Darche made solid gear, but the small plastics are always the first to go — and the stove control knob is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Darche made solid gear, but the small plastics are always the first to go — and the stove control knob is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Control knobs split at the valve stem. Heat cycling is the killer here: years of expanding and contracting work-hardens the plastic until a routine bump becomes the final straw.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles everyday warmth without complaint.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Darche |
|---|---|
| Vehicle / equipment type | Camping gear |
| Common failure mode | Control knobs split at the valve stem |
| Typical use case | Replacement part for camping gear. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $8 – $18 |
| Expected lifespan | 4–6 years in normal use |
| Outdoor suitable | Yes |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
