TV Stand Foot
If your tv stand foot has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $15 – $35
- Estimated print time: 2–3 hours
- Final pricing is confirmed by quote.
If your tv stand foot has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. With your sample on the bench this is a realistic reproduction job.
Why these break
TV feet crack in house moves and are never sold separately. The factory part is made from plastic that loses its plasticisers over the years. It gets glassy, then one day it lets go under a load it used to handle easily.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in PETG-CF. Carbon-fibre PETG is noticeably stiffer than the stock plastic, so the part holds its shape under clamping force instead of slowly creeping loose.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Vehicle / equipment type | Televisions |
|---|---|
| Common failure mode | TV feet crack in house moves and are never sold separately |
| Typical use case | Replacement part for televisions. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | ABS |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 2–3 hours |
| Estimated cost range | $15 – $35 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
