Yamaha Music Panel Button Cap
Yamaha Music made solid gear, but the small plastics are always the first to go — and the panel button cap is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $4 – $10
- Estimated print time: 20–40 minutes
- Minimum order: 2
- Final pricing is confirmed by quote.
Yamaha Music made solid gear, but the small plastics are always the first to go — and the panel button cap is a regular on our bench. With your sample on the bench this is a realistic reproduction job.
Why these break
Button caps crack or go missing on older gear. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — years on, there's no margin left in it.
How we reproduce them
This is a quick job on our end — we take dimensions from your old part, adjust for print tolerances, and run a small batch so you have spares for next time.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles everyday warmth without complaint.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Manufacturer | Yamaha Music |
|---|---|
| Vehicle / equipment type | Musical instrument |
| Common failure mode | Button caps crack or go missing on older gear |
| Typical use case | Replacement part for musical instrument. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | Resin |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 20–40 minutes |
| Estimated cost range | $4 – $10 |
| Expected lifespan | 5+ years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
