Office Chair Armrest Cap
If your office chair armrest cap has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
If your office chair armrest cap has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
Why these break
Armrest caps crack and crumble at the edges. Vibration and repeated use do the damage: thousands of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
The process is simple: drop the part in or send clear photos with a ruler in frame, we confirm fit details, and print replacements — often with a little extra material where the original always cracked.
We print these in PETG. PETG has a little give in it, so it snaps into place like the original and shrugs off the knocks that shattered the old part.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Vehicle / equipment type | Office chairs |
|---|---|
| Common failure mode | Armrest caps crack and crumble at the edges |
| Typical use case | Replacement part for office chairs. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG |
| Alternative materials | TPU |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $8 – $18 |
| Expected lifespan | 4–6 years in typical service |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
