Keyboard Tilt Feet
If your keyboard tilt feet has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. With your sample on the bench this is a realistic reproduction job.
If your keyboard tilt feet has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. With your sample on the bench this is a realistic reproduction job.
Why these break
Tilt feet snap off and keyboards rock. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
This is a quick job on our end — we take dimensions from your old part, adjust for print tolerances, and run a small batch so you have spares for next time.
We print these in ABS. ABS matches the look and feel of the factory plastic, takes a sanded or textured finish well, and handles everyday warmth without complaint.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Vehicle / equipment type | Keyboards |
|---|---|
| Common failure mode | Tilt feet snap off and keyboards rock |
| Typical use case | Replacement part for keyboards. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ABS |
| Alternative materials | PETG |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 20–40 minutes |
| Estimated cost range | $4 – $10 |
| Expected lifespan | 4–6 years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
