Kitchen Scale Feet
If your kitchen scale feet has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
If your kitchen scale feet has cracked, worn flat or gone missing, we can usually match one from a sample or clear photos with measurements. We've made this style of part before and can usually print yours without drama.
Why these break
Feet go missing and scales rock — bad for accuracy. UV exposure breaks down the polymer chains in the original material. By the time the surface looks chalky or faded, the strength underneath is already gone.
How we reproduce them
Reproducing one is straightforward for us: we measure your sample (broken is fine, as long as most of it is there), match the profile, and print in a tougher modern material. Turnaround is usually within the week.
We print these in TPU. TPU is flexible and grippy, so it absorbs the impacts and vibration that crack rigid plastics, and it is kind to the surfaces it touches.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we'll give you a straight answer before any work starts.
Part details
| Vehicle / equipment type | Kitchen scales |
|---|---|
| Common failure mode | Feet go missing and scales rock — bad for accuracy |
| Typical use case | Replacement part for kitchen scales. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | TPU |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 15–30 minutes |
| Estimated cost range | $4 – $10 |
| Expected lifespan | 3–5 years in normal use |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
