Massey Ferguson Gauge Bezel
Massey Ferguson made solid gear, but the small plastics are always the first to go — and the gauge bezel is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $14 – $30
- Estimated print time: 1–2 hours
- Final pricing is confirmed by quote.
Massey Ferguson made solid gear, but the small plastics are always the first to go — and the gauge bezel is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Why these break
Dash gauge bezels crack and fog lets dust in. The original was moulded thin to save cents at production volume. That was fine when the plastic was fresh — years on, there's no margin left in it.
How we reproduce them
We model these in CAD from your sample, print a test-fit first, then run the final part once the fit is confirmed. Expect a few days end to end.
We print these in ASA. ASA is the UV-stable cousin of ABS — it holds its colour and strength through years of Australian sun where the original plastic went chalky and brittle.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Massey Ferguson |
|---|---|
| Vehicle / equipment type | Tractor / farm machinery |
| Common failure mode | Dash gauge bezels crack and fog lets dust in |
| Typical use case | Replacement part for tractor / farm machinery. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | ASA |
| Alternative materials | ABS |
| Print technology | FDM |
| Difficulty | Medium |
| Estimated print time | 1–2 hours |
| Estimated cost range | $14 – $30 |
| Expected lifespan | 3–5 years of Australian UV |
| Outdoor suitable | Yes |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
