Asko Dryer Door Hinge Bush
Asko made solid gear, but the small plastics are always the first to go — and the dryer door hinge bush is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Asko made solid gear, but the small plastics are always the first to go — and the dryer door hinge bush is a regular on our bench. We've made this style of part before and can usually print yours without drama.
Why these break
Hinge bushes wear oval and the door sags. Vibration fatigue does the damage: thousands of kilometres of small flexes add up to a crack at the stress point, usually right where the part clips or pivots.
How we reproduce them
The process is simple: drop the part in or send clear photos with a ruler in frame, we confirm fit details, and print replacements — often with a little extra material where the original always cracked.
We print these in Nylon. Nylon is slippery and fatigue-resistant, which makes it the right choice for parts that pivot, slide or flex thousands of times.
As with everything in our library: whether a part can be reproduced depends on size, load, heat, material, and having a decent sample to work from. Send photos first — the assessment costs you nothing, and we'll tell you honestly if a genuine spare is the better option.
Part details
| Manufacturer | Asko |
|---|---|
| Vehicle / equipment type | Household appliance |
| Common failure mode | Hinge bushes wear oval and the door sags |
| Typical use case | Direct replacement for the original dryer door hinge bush on the Asko. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $8 – $20 |
| Expected lifespan | 4–6 years of regular use |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
