Battery Hold-Down Clamp Block
Battery hold-down blocks and wedges matched to your battery and tray. Printed solid — no flex.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $10 – $25
- Estimated print time: 1–2 hours
- Final pricing is confirmed by quote.
Battery hold-down blocks and wedges matched to your battery and tray. Printed solid — no flex.
Common failure: Plastic clamp blocks crack and the battery shifts.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Most makes and models |
|---|---|
| Common failure mode | Plastic clamp blocks crack and the battery shifts |
| Typical use case | Replacement part for most makes and models. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | ASA |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $10 – $25 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | Depends |
| Load bearing | Yes |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
