Bench Grinder Tool Rest Knob
Lock knobs for grinder tool rests and eye shields, printed around a standard nut.
Lock knobs for grinder tool rests and eye shields, printed around a standard nut.
Common failure: Tool rest lock knobs strip or go missing.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Bench grinders |
|---|---|
| Common failure mode | Tool rest lock knobs strip or go missing |
| Typical use case | Replacement part for bench grinders. |
Printing & reverse engineering
| Can print directly | Yes |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 30–60 minutes |
| Estimated cost range | $8 – $18 |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
