Circular Saw Blade Guard Knob
Adjustment knobs for circular saws (depth, bevel, fence). Note: we don't reproduce safety guards themselves — knobs and levers only.
Adjustment knobs for circular saws (depth, bevel, fence). Note: we don't reproduce safety guards themselves — knobs and levers only.
Common failure: Depth/bevel adjustment knobs crack and slip.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Most circular saw brands |
|---|---|
| Common failure mode | Depth/bevel adjustment knobs crack and slip |
| Typical use case | Replacement part for most circular saw brands. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | PETG-CF |
| Alternative materials | Nylon |
| Print technology | FDM |
| Difficulty | Easy |
| Estimated print time | 1–2 hours |
| Estimated cost range | $12 – $28 |
| Expected lifespan | 3–5 years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | No |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
