Classic Car Dash Knob Reproduction
Reproduction dash knobs for classics — heater, choke, wiper, lighter surrounds. Resin printed from a scan of a surviving knob, then finished and painted.
Broken part? We may be able to recreate it — ask us about this part.
- Estimated cost: $30 – $80 each
- Estimated print time: 3–6 hours
- Final pricing is confirmed by quote.
Reproduction dash knobs for classics — heater, choke, wiper, lighter surrounds. Resin printed from a scan of a surviving knob, then finished and painted.
Common failure: Original heater, choke and wiper knobs cracked or missing.
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples. Bring in the damaged part or upload photos for assessment and we’ll let you know what’s realistic before any work starts.
Part details
| Vehicle / equipment type | Classic and vintage vehicles |
|---|---|
| Common failure mode | Original heater, choke and wiper knobs cracked or missing |
| Typical use case | Replacement part for classic and vintage vehicles. |
Printing & reverse engineering
| Can print directly | No |
|---|---|
| Can scan from broken sample | Yes |
| Can redesign / improve | Yes |
| Recommended material | Resin |
| Alternative materials | ABS |
| Print technology | Resin |
| Difficulty | Hard |
| Estimated print time | 3–6 hours |
| Estimated cost range | $30 – $80 each |
| Expected lifespan | 5+ years |
| Outdoor suitable | No |
| Heat resistant | No |
| Load bearing | Depends |
| Requires post-processing | Yes |
Ask us about this part
Many plastic parts can be recreated, repaired, redesigned, or printed, depending on size, load, heat, material, and available samples.
